Table 5-1 Bottom cover descriptions and part numbers (continued)
Description Spare part number
In atmospheric blue finish N91005-001
In meteor silver finish N91006-001
Before removing the bottom cover, prepare the computer for disassembly (see Preparation for
disassembly on page 31).
Remove the bottom cover:
1. Close the computer and rest it upside down on a flat work surface with the front toward you.
2. Remove the four Torx5 M2.0 × 6.6 screws that secure the bottom cover to the computer.
3. Insert a thin, plastic tool, such as a case utility tool (1), into the rear edge of the bottom cover and
release the bottom cover from the computer.
4. Swing the rear edge of the bottom cover (2) up and forward, and then remove the bottom cover (3).
32
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
