2. Remove the OLED board (2) from the computer.
To replace the OLED board, reverse the removal procedures.
Audio jack board cable
To remove the audio jack board cable, use this procedure and illustration.
Table 5-7
Audio jack board cable description and part number
Description Spare part number
Audio jack board cable N91026-001
Before removing the audio jack board cable, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 31).
2. Remove the bottom cover (see Bottom cover on page 31).
3. Disconnect the battery cable from the computer (see Battery on page 33).
Remove the audio jack board cable:
1. Release the zero insertion force (ZIF) connector (1) the audio jack board cable is connected to, and
then disconnect the audio jack board cable from the system board.
2. Release the ZIF connector (2) the audio jack board cable is connected to, and then disconnect the
audio jack board cable from the audio jack board.
3. Release the audio jack board cable from the retention clips (3) that are built into the fan.
40
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
