4. Remove the audio jack board cable (4) from the computer.
To replace the audio jack board cable, reverse the removal procedures.
Audio jack board
To remove the audio jack board, use this procedure and illustration.
Table 5-8
Audio jack board description and part number
Description Spare part number
Audio jack board N91025-001
NOTE: The audio jack board spare part kit does not include the audio jack cable. The audio jack cable is available using spare
part number N91026-001.
Before removing the audio jack board, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 31).
2. Remove the bottom cover (see Bottom cover on page 31).
3. Disconnect the battery cable from the computer (see Battery on page 33).
4. Remove the audio jack board cable (see Audio jack board cable on page 40).
Remove the audio jack board:
1. Remove the two Phillips M2.0 × 3.9 screws (1) that secure the audio jack board to the computer.
Audio jack board
41
To Next Page
Loading...
