NonStop i System With a Fault-Tolerant Data Center
In this supported configuration, the NonStop system is installed in a Tier-IV data center. The data
center tier classification is defined by the Uptime InstituteTM Tier Classifications Define Site
Infrastructure White Paper.
IMPORTANT: With this configuration, you can guarantee that the data center never loses
power.
Figure 15 shows an example of a NonStop system in a fault-tolerant data center which has two
simultaneously-active power distribution paths with multiple backup UPS and engine-generator
systems.
Figure 15 NonStop i System With a Fault-Tolerant Data Center
Supported UPS Configurations 65
To Next Page
Loading...
