HPE NonStop NS7 CG System Alarm Panel
The system alarm panel provides SNMP, visual, and audible alarm indicators and relays for
generating four levels of alarms for hardware errors in an NS7 CG system.
Alarm levels are:
DescriptionAlarm Level
A severe service-affecting condition has occurred. Immediate corrective action is required.Critical
A serious disruption of service, a malfunction, or a FRU failure has occurred. Immediate corrective
action is required.
Major
A non-service-affecting condition has occurred. This alarm does not require immediate corrective
action.
Minor
A power fault has occurred.Power
No alarms are active.Idle
More information
NonStop X System Hardware Installation Manual (service providers only)
Technical Document
“System Installation Specifications for NS7 CG Systems” (page 70)
“DC Power Distribution for NS7 CG Systems” (page 70)
NS7 CG X2 Standard and Optional Hardware 69
To Next Page
Loading...
Need help?
General