partition, copying the setup loader ( setupldr.efi) application
to the ESP partition, configuring the winnt.sif file, specifying
the Windows Setup boot option, and rebooting the server.
sstk.conf In this file, you can set the SSTK variables used by the scripts, such
as the default action of SSTK, the disk where windows will be
installed, the name of configuration files, and so on.
SSTK interface and auxiliary functions:
main_toolkit_launch.sh Sets up the toolkit environment by creating a RAMdisk,
copying scripts and utilities to the RAMdisk, running I/O
hardware inventory, and prompting you to select
deployment task.
raid1-lsi.sh Contains the functions for the RAID configuration in LSI
controllers.
sstkw_functions Auxiliary functions for the scripts.
• The utilities directory contains the following files:
CLMChecking A utility that performs memory optimization in
cellular systems.
allboards.xml A PCI device list file is used by the hwquery and ifhw
utilities to convert PCI IDs found in hardware
discovery into device names.
cfggen A utility that is the RAID configuration utility for LSI
controllers used in SSTK for applying RAID 1 in LSI
1068 controllers. The utility works in conjunction with
cpqacuxe.
conrep The configuration replication utility that reads EFI
variables from the model server and records them in
the conrep.dat file.
conrep.xml A file that includes a list of EFI variables which
determines what data to retrieve from the server. You
can edit this file to control the data collection.
cpqacuxe-X.YY-Z_ia64.tar.gz The array configuration utility operates in capture
mode (reads the configuration of a storage array
controller and records it in a configuration file) or in
input mode (writes the configuration to the target
server). This archive is extracted to /sbin/cpqacuxe
and a structure under /opt/compaq/cpqacuxe.
efibootmgr The EFI boot manager utility loads EFI applications
(such as the OS boot loader) and EFI drivers. The EFI
boot manager allows you to control the server's boot
environment using variables stored in NVRAM.
efivar The efivar utility is a generic tool for setting EFI
variables from SSTK LinuxPE.
gen-setupldr-options The gen-setupldr-options utility generates
options for the setup loader, which launches the
Windows installation process.
hpia64info The hpia64info utility displays information about
Management Processor and system firmware.
hwdisc The hardware discovery utility creates an
inventory of the server and writes this data to a file.
hpqlarep The hpqlarep utility enables or disables the EFI boot
setting on QLogic 2 GB or 4 GB HBAs.
28 Creating a server profile
To Next Page
Loading...
Need help?
General