HP Intelligent Power Distribution Unit - IPV4 Network Settings submenu; IPV6 Network Settings submenu; Remote Console submenu; Web Access Configuration submenu

HP Intelligent PDU Service Menu 65
Option number Submenu Description
8 Session Settings Enables you to configure timeouts and retries
for remote sessions
0 Previous Menu Returns to the previous menu
IPV4 Network Settings submenu
Option number Submenu Description
1 IPV4 Static Address Enables you to set the iPDU IP address
2 IPV4 Static Subnet Mask Enables you to set the iPDU subnet mask
3 IPV4 Static Gateway Enables you to set the iPDU default gateway
4 IPV4 Toggle Boot Mode Enables you to toggle the boot mode
between DCHP and Static IP
5 IPV4 Ping Utility Pings the iPDU
0 Previous Menu Returns to the previous menu
IPV6 Network Settings submenu
Option number Submenu Description
1 IPV6 Gateway Tunnel Enables you to set the iPDU gateway tunnel
2 IPV6 Ping Utility Pings the iPDU
0 Previous Menu Returns to the previous menu
Remote Console submenu
Option number Submenu Description
1 Protocol Selection Enables you to select telnet
2 Telnet Configuration Enables you to configure the port for telnet
0 Previous Menu Returns to the previous menu
Web Access Configuration submenu
Option number Submenu Description
1 Enable/Disable Web Access Enables you to enable or disable web access
2 HTTP/HTTPS Port
Configuration
Enables you to configure the port for
HTTP/HTTPS
0 Previous Menu Returns to the previous menu
File Transfer (FTP) submenu
Option number Submenu Description
1 Enable/Disable service Enables you to enable or disable FTP service
0 Previous Menu Returns to the previous menu