Optional power monitoring using SNMP 80
Optional power monitoring using SNMP
SNMP monitoring
The iPDU status, events, and traps can be monitored using third-party SNMP managers. SNMP monitoring
supports the RFC-1628 MIB and the HP Power MIB (CPQPOWER.MIB).
To configure SNMP monitoring:
1. Using the SNMP Managers tab (on page 55), configure the third-party SNMP manager to monitor
the iPDU.
2. Using the third-party SNMP manager software, configure the iPDU information to be monitored by
the SNMP manager.
The HP Power MIB (CPQPOWER.MIB) can be downloaded from the HP website
(http://www.hp.com/go/rackandpower
).
To Next Page
Loading...
