1–12 Reference Guide
Using Your hp iPAQ h2200 Series
DRAFT - Revised 10/16/02
hp CONFIDENTIAL 12/3/02
File: ch1-UsingtheH2200.fm PN: 293146-001
To perform a full reset:
1. Press and hold the 3A(Calendar) and 3D (iTask) (or first and
third )application buttons on the front of the unit and, at the
same time, press the Reset button on the back of the h2200
unit with the stylus.
2. Hold all buttons until the displayed image begins to fade
(approximately four seconds).
3. Release the application buttons and stylus.
✎
To verify a full reset, press the power button. If the iPAQ h2200
Series has been fully reset, it will not power on.
4. Reactivate the battery by:
❏ Removing and reinstalling the battery
❏ Connecting the iPAQ h2200 to AC power
❏ Pressing the Reset button with the stylus
5. Set up your iPAQ h2200 Series Pocket PC.
To Next Page
Loading...
