HP iPAQ h2200 Series - Performing a Normal Reset; Performing a Full Reset

Using Your hp iPAQ h2200 Series
Reference Guide 1–11
DRAFT - Revised 10/16/02
hp CONFIDENTIAL 12/3/02
File: ch1-UsingtheH2200.fm PN: 293146-001
Performing a Normal Reset
A normal reset is sometimes referred to as a “soft reset.” Perform
a normal reset to stop all running applications. A normal reset
will not erase any programs or data stored in RAM or ROM.
Ä
CAUTION: Be sure to save any unsaved data before performing a
normal reset since normal reset erases all unsaved data.
To perform a normal reset:
1. Locate the reset button on the back of the iPAQ h2200 Series.
2. Using the stylus, lightly press the reset button for two
seconds.
✎
The iPAQ h2200 Series will restart in approximately five seconds
and display the Today screen.
Performing a Full Reset
A full reset is sometimes referred to as a “hard reset.” Perform a
full reset when you want to clear all settings, programs, and data
from RAM.
A full reset deactivates the battery. The power button will not
function until the battery is reactivated.
Ä
CAUTION: If you perform a full reset, your h2200 unit will return to
its default settings and lose all information that is not recorded in
ROM.