HP jetdirect 175x User Manual

ENWW Introducing the HP Jetdirect Print Server 11
If not supplied with this product, HP network setup and
management software for supported systems may be obtained from
HP support at:
http://www.hp.com/support/net_printing
For software to set up network printing on other systems, contact
your system vendor.
Security Protocols
SNMP (IP and IPX)
SNMP (Simple Network Management Protocol) is used by network
management applications for device management. HP Jetdirect
print servers support SNMP and standard MIB-II (Management
Information Base) objects on both IP and IPX networks.
HP Jetdirect 175x and 200m print servers support an SNMP v1/v2c
agent only.
Full-featured HP Jetdirect print servers support an SNMP v1/v2c
agent, and an SNMP v3 agent for enhanced security.
HTTPS
Full-featured HP Jetdirect print servers support HTTPS (Secure
Hyper Text Transfer Protocol) for secure, encrypted management
communications between the embedded Web server and your Web
browser.
Value-based print servers (for example, HP Jetdirect 175x and
200m) do not support HTTPS.

HP jetdirect 175x Specifications

General

Network ready	Yes
Power supply type	AC/DC
Cabling technology	10/100Base-T(X)
Networking features	Fast Ethernet
Compatible operating systems	Windows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product color	White
Firmware upgradeable	No
Number of simultaneous printers	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	15 - 95 %
Safety	IEC
Certification	FCC, DoC
AC input voltage	100-127 V
AC input frequency	60 Hz
Power consumption (typical)	2.8 W
Supported network protocols	TCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory	2 MB
Minimum storage drive space	40 MB
Minimum system requirements	CD-ROM
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-T, 100BASE-TX, 10BASE-T
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	0
Cables included	USB

Weight and Dimensions

Depth	127 mm
Width	101.6 mm
Height	38.1 mm
Weight	118 g