ENWW The HP Jetdirect Control Panel Menu 277
Classic Control Panel
Classic control panels can typically display
two lines of 16 characters each.
As described in Table C.1
, the HP Jetdirect
control panel menu allows you to enable or
disable network protocols, and configure
selected network parameters. On the control
panel display, an asterisk (*) is used to
identify the selected value.
Table C.1 HP Jetdirect Classic Control Panel Menu (1 of 6)
Menu Item Description
CFG NETWORK= Selects whether or not you want to access the Jetdirect menu.
NO (default): Bypass the HP Jetdirect menu.
YES: Access the HP Jetdirect menu. You must change this to
YES* each time you want to access the menu.
CFG 802.11B= (802.11b wireless print servers only) Selects whether or not you
want to access the 802.11b configuration menu.
NO (default): Bypass the menu.
YES: Access the menu. You must change this to YES* each time
you want to access the menu.
If YES* is selected, the following items may be configured:
Note: Most classic control panels display uppercase characters
only. To indicate case, the symbol “+” (for uppercase) or “-” (for
lowercase) will appear after each character during character
entry.
MODE: Choose one of the following wireless topologies:
■ AD HOC (default)
■ INFRA. (Infrastructure Mode)
To Next Page
Loading...
