ENWW The HP Jetdirect Control Panel Menu 283
Graphical Control Panel
Graphical control panels
typically display 18 characters
on a line, and as many as four
lines at a time. In addition,
scrolling may be supported to
allow display of additional
lines.
On graphical control panels, a numeric keypad and navigation
buttons are used to access HP Jetdirect menu items. For a
description of menu items and options, see Table C.2
.
Table C.2 HP Jetdirect Graphical Control Panel Menu (1 of 7)
Menu Item Options Description of settings
802.11b MODE Choose one of the following wireless
topologies:
■ AD HOC (default)
■ INFRASTRUCTURE
NETWORK NAME Specify a Network Name (SSID). Choose a
selection below:
hpsetup (default): The factory-default SSID
typically used for initial configuration.
<AUTO>: The print server will automatically
detect SSIDs and attempt to connect and
authenticate on a network, starting with the
SSID network with the best signal strength.
<list of Network Names>: The available
SSIDs detected by the print server.
<CUSTOM>: Use the CUSTOM NAME menu
to enter a custom SSID.
CUSTOM NAME Enter up to 32 characters for a custom
Network Name (SSID). If you subsequently
enter a new custom SSID, it will overwrite the
existing custom SSID.
?
MENUS
+ XXXXXXXXXX
To Next Page
Loading...
