EasyManuals Logo

HP jetdirect 175x User Manual

HP jetdirect 175x
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
ENWW 7
1
Introducing the HP Jetdirect
Print Server
Introduction
HP Jetdirect print servers allow you to connect printers and other
devices directly to a network. By attaching a device directly to a
network, you can install it in a convenient location and share it with
multiple users. In addition, a network connection allows data
transfers to or from the device at network speeds.
HP Jetdirect internal print servers are installed in HP printers that
have a compatible input/output (I/O) slot. HP Jetdirect external
print servers connect printers to the network by adapting the
printers USB port to the network.
Note Unless otherwise specified, the term print server in
this manual refers to the HP Jetdirect print servers
and not a separate computer running print server
software.
When connected through a wireless connection to
your network, an HP Jetdirect wireless print server
provides the same printing services as Jetdirect
print servers connected by network cables. For more
information on HP wireless print servers, see
Appendix B
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP jetdirect 175x and is the answer not in the manual?

HP jetdirect 175x Specifications

General IconGeneral
Network readyYes
Power supply typeAC/DC
Cabling technology10/100Base-T(X)
Networking featuresFast Ethernet
Compatible operating systemsWindows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product colorWhite
Firmware upgradeableNo
Number of simultaneous printers1
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 55 °C
Operating relative humidity (H-H)15 - 95 %
SafetyIEC
CertificationFCC, DoC
AC input voltage100-127 V
AC input frequency60 Hz
Power consumption (typical)2.8 W
Supported network protocolsTCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory2 MB
Minimum storage drive space40 MB
Minimum system requirementsCD-ROM
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Network connection typeEthernet LAN
Copper ethernet cabling technology100BASE-T, 100BASE-TX, 10BASE-T
USB connector typeUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity0
Cables includedUSB
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width101.6 mm
Height38.1 mm
Weight118 g

Related product manuals