HP jetdirect 175x User Manual

ENWW Security Features 183
Table 7.1 Summary of HP Jetdirect Security Features (1 of 3)
Secure Embedded Web Server Management
(For full-featured print servers only)
● A preinstalled, self-signed digital certificate provides HTTPS (secure HTTP)
access to the embedded Web server from your Web browser. HTTPS (secure
HTTP) provides secure, encrypted communications with your browser.
● Digital certificates issued by a trusted third party can be installed on the print
server, allowing it to be configured as a trusted site.
● Using HTTPS, the embedded Web server provides configuration and
management of network parameters and protocols through a secure channel.
● An HP Jetdirect Security Configuration Wizard provides an easy-to-use
interface to configure security settings.
● A wireless configuration wizard provides an easy-to-use interface to configure
wireless encryption and authentication settings.
Network Protocol Control
● Network printing, printing services, device discovery, and management
protocols on the HP Jetdirect print server can be enabled or disabled. By
disabling unused or unnecessary protocols, unauthorized access through
applications that use these protocols can be prevented.
● Protocols may be enabled or disabled through Telnet, embedded Web server,
and HP Web Jetadmin.
IP Administrator Password
● Used by Telnet, HP Web Jetadmin, and the embedded Web server to control
access to HP Jetdirect configuration parameters.
● Up to 16 alphanumeric characters may be used.
● Configured on the HP Jetdirect print server using TFTP (Chapter 3), Telnet
(Chapter 3
), embedded Web server (Chapter 4) services, or HP Web Jetadmin.
Up to 16 alphanumeric characters are allowed.
● If configured through the embedded Web server, may be synchronized as the
SNMP Set Community Name used in HP Web Jetadmin SNMP v1/v2c Set
commands.
● Cleared by cold reset of the print server to factory default settings.

HP jetdirect 175x Specifications

General

Network ready	Yes
Power supply type	AC/DC
Cabling technology	10/100Base-T(X)
Networking features	Fast Ethernet
Compatible operating systems	Windows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product color	White
Firmware upgradeable	No
Number of simultaneous printers	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	15 - 95 %
Safety	IEC
Certification	FCC, DoC
AC input voltage	100-127 V
AC input frequency	60 Hz
Power consumption (typical)	2.8 W
Supported network protocols	TCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory	2 MB
Minimum storage drive space	40 MB
Minimum system requirements	CD-ROM
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-T, 100BASE-TX, 10BASE-T
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	0
Cables included	USB

Weight and Dimensions

Depth	127 mm
Width	101.6 mm
Height	38.1 mm
Weight	118 g