HP jetdirect 175x User Manual

ENWW Introducing the HP Jetdirect Print Server 9
Note When upgrading a supported print server, you may
need to perform the upgrade twice if it contains a
firmware version prior to X.24.00. This will be
necessary if you want the print server to support
management tools (for example, the embedded Web
server) using non-English languages.
Supported Network Protocols
Note For HP Jetdirect wireless print servers, this section
assumes that a wireless connection to your network
has been established.
The supported network protocols, and popular network printing
environments that use those protocols, are listed in Table 1.2
.
Table 1.2 Supported Network Protocols (1 of 2)
Supported
Network
Protocols
Network Printing Environments* Product Support
TCP/IP Microsoft Windows 98/Me/NT4.0/2000/XP
(32- and 64-bit), Direct Mode
Novell NetWare 5, 6 using NDPS
UNIX and Linux, including:
Hewlett-Packard HP-UX, Sun
Microsystems Solaris (SPARCsystems
only), IBM AIX**, HP MPE-iX**, RedHat
Linux, SuSE Linux
LPR/LPD (Line Printer Daemon)
IPP (Internet Printing Protocol)
FTP (File Transfer Protocol)
J6035C (175x)***
J6038A (310x)
J7942A (en3700)
J6061A (380x)
J6039C (200m)***
J6042B (250m)
J6044A (280m)
J4167A (610n)
J6057A (615n)
J7934A (620n)
J6058A (680n)
* Refer to the current HP Jetdirect product data sheets for additional network systems
and versions. For operation with other network environments, consult your system
vendor or authorized HP dealer.
** For these network systems, contact your network system vendor for software,
documentation, and support.
*** Windows IP/IPX Direct Mode printing and LPD/Windows supported. NetWare is
not supported. IPP is not supported. LPD/UNIX is not supported.

HP jetdirect 175x Specifications

General

Network ready	Yes
Power supply type	AC/DC
Cabling technology	10/100Base-T(X)
Networking features	Fast Ethernet
Compatible operating systems	Windows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product color	White
Firmware upgradeable	No
Number of simultaneous printers	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	15 - 95 %
Safety	IEC
Certification	FCC, DoC
AC input voltage	100-127 V
AC input frequency	60 Hz
Power consumption (typical)	2.8 W
Supported network protocols	TCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory	2 MB
Minimum storage drive space	40 MB
Minimum system requirements	CD-ROM
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-T, 100BASE-TX, 10BASE-T
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	0
Cables included	USB

Weight and Dimensions

Depth	127 mm
Width	101.6 mm
Height	38.1 mm
Weight	118 g