HP jetdirect 175x User Manual

ENWW Troubleshooting the HP Jetdirect Print Server 199
Troubleshooting Wireless Print
Servers
Unable to Communicate During Initial Setup
Verify the following:
● Your wireless computer is configured to match the default
wireless network settings on the HP Jetdirect print server:
■ Communication Mode: Ad Hoc
■ Network Name (SSID): hpsetup
■ Encryption (WEP): <Disabled>
Note The Network Name (SSID) is case-sensitive. Be
sure to specify “hpsetup” using lowercase
characters.
● The HP Jetdirect print server is turned on and operating properly
(print a Jetdirect configuration page).
● You are within range of the HP Jetdirect print server.
● There are fewer than six devices total on the Ad Hoc network
(with SSID “hpsetup”).
● There is no Access Point in the vicinity that is configured with
an SSID of “hpsetup”.
● Multiple print servers are not being configured at the same time.
If there are multiple print servers, turn all off except the one you
want to configure.

HP jetdirect 175x Specifications

General

Network ready	Yes
Power supply type	AC/DC
Cabling technology	10/100Base-T(X)
Networking features	Fast Ethernet
Compatible operating systems	Windows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product color	White
Firmware upgradeable	No
Number of simultaneous printers	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	15 - 95 %
Safety	IEC
Certification	FCC, DoC
AC input voltage	100-127 V
AC input frequency	60 Hz
Power consumption (typical)	2.8 W
Supported network protocols	TCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory	2 MB
Minimum storage drive space	40 MB
Minimum system requirements	CD-ROM
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-T, 100BASE-TX, 10BASE-T
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	0
Cables included	USB

Weight and Dimensions

Depth	127 mm
Width	101.6 mm
Height	38.1 mm
Weight	118 g