HP jetdirect 175x User Manual

ENWW HP Jetdirect Configuration Page 239
3A NDS ERR: UNABLE
TO FIND TREE
The NDS tree cannot be located. The message may occur
when the file server is not running or when a network
communications problem exists.
3B NDS
CONNECTION STATE
ERROR
The HP Jetdirect print server cannot change the NDS
connection state. Check licenses on the spooling server.
3C NDS ERR:
UNRESOLVED
QUEUE
The print queue object cannot be located in the specified
NDS context.
3D NDS ERR:
CANNOT READ Q
HOST
Cannot locate the file server on the network. The server may
not be running at this time or a communications problem
may exist.
3E NDS PRNT SRVR
PUBLIC KEY ERR
Print Server Object Name mismatch. Unable to read the
print server’s public key. Verify object names. Verify that the
object key assigned to the HP Jetdirect print server is a print
server object and not a printer or other object.
3F UNABLE TO GET
NDS SRVR ADDR
The NDS server address cannot be located or accessed.
40 ARP DUPLICATE IP
ADDRESS
The ARP layer has detected another node on the network
using the same IP address as the HP Jetdirect print server.
Extended error information below this message shows the
hardware address of the other node.
41 NOVRAM ERROR The HP Jetdirect print server cannot read the contents of its
NOVRAM.
42 INVALID IP
ADDRESS
The IP address specified for the HP Jetdirect print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for proper entries.
43 INVALID SUBNET
MASK
The IP subnet mask specified for the HP Jetdirect print
server (through BOOTP) is an invalid subnet mask. Check
your Bootptab file for proper entries.
44 INVALID GATEWAY
ADDRESS
The default gateway IP address specified for the
HP Jetdirect print server (through BOOTP) is an invalid IP
address for specifying a single node. Check your Bootptab
file for proper entries.
45 INVALID SYSLOG
ADDRESS
The syslog server IP address specified for the HP Jetdirect
print server (through BOOTP) is an invalid IP address for
specifying a single node. Check your Bootptab file for proper
entries.
Table 9.12 Error Messages (8 of 11)
Error Code and
Message
Description

HP jetdirect 175x Specifications

General

Network ready	Yes
Power supply type	AC/DC
Cabling technology	10/100Base-T(X)
Networking features	Fast Ethernet
Compatible operating systems	Windows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product color	White
Firmware upgradeable	No
Number of simultaneous printers	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	15 - 95 %
Safety	IEC
Certification	FCC, DoC
AC input voltage	100-127 V
AC input frequency	60 Hz
Power consumption (typical)	2.8 W
Supported network protocols	TCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory	2 MB
Minimum storage drive space	40 MB
Minimum system requirements	CD-ROM
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-T, 100BASE-TX, 10BASE-T
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	0
Cables included	USB

Weight and Dimensions

Depth	127 mm
Width	101.6 mm
Height	38.1 mm
Weight	118 g