EasyManuals Logo

HP jetdirect 175x User Manual

HP jetdirect 175x
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
ENWW TCP/IP Configuration 75
Depending on the system, the LAN hardware address may require
a specific format.
For example:
For Windows NT 4.0, 2000, XP
arp -s 192.168.45.39 00-01-E6-a2-31-98
ping 192.168.45.39
For UNIX
arp -s 192.168.45.39 00:01:E6:a2:31:98
ping 192.168.45.39
Note Once the IP address has been set on the print server,
additional arp and ping commands will be ignored.
Once the IP address is configured, arp and ping
cannot be used unless the print server is reset to
factory values (see Chapter 8
).
On UNIX systems, the arp -s command may vary
between different systems.
Some BSD-based systems expect the IP address (or
host name) in reverse order. Other systems may
require additional parameters. See your system
documentation for specific command formats.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP jetdirect 175x and is the answer not in the manual?

HP jetdirect 175x Specifications

General IconGeneral
Network readyYes
Power supply typeAC/DC
Cabling technology10/100Base-T(X)
Networking featuresFast Ethernet
Compatible operating systemsWindows 98 Windows NT 4.0 Windows Me Windows 2000 Windows Server 2003 Windows XP (32/64-bit) Windows Vista (32/64-bit) Windows 2003 (64-bit) Mac OS 8.6+
Product colorWhite
Firmware upgradeableNo
Number of simultaneous printers1
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 55 °C
Operating relative humidity (H-H)15 - 95 %
SafetyIEC
CertificationFCC, DoC
AC input voltage100-127 V
AC input frequency60 Hz
Power consumption (typical)2.8 W
Supported network protocolsTCP/IP, IPX/SPX, AppleTalk, IP Direct, LPD, Telnet, SLP, IGMP, BOOTP/DHCP, WINS, SNMP, HTTP, Auto-IP, Bonjour
Flash memory2 MB
Minimum storage drive space40 MB
Minimum system requirementsCD-ROM
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Network connection typeEthernet LAN
Copper ethernet cabling technology100BASE-T, 100BASE-TX, 10BASE-T
USB connector typeUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity0
Cables includedUSB
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width101.6 mm
Height38.1 mm
Weight118 g

Related product manuals