HP laserjet pro M227sdn - Set the Shut Down After Inactivity delay and configure the printer to use 1 watt or less of power

1. 2-line control panels: On the printer control panel, press the button.
Touchscreen control panels: From the Home screen on the printer control panel, swipe until the Setup
menu displays. Touch the Setup
icon to open the menu.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Sleep/Auto Off After
3. Use the arrow keys to select the time for the Sleep/Auto Off delay, and then press the OK button.
Select the time for the Sleep/Auto Off After delay.
Set the Shut Down After Inactivity delay and configure the printer to use 1 watt or
less of power
Use the control panel menus to set the amount of time before the printer shuts down.
NOTE: After the printer shuts down, the power consumption is 1 watt or less.
Complete the following procedure to change the Shut Down After Delay setting:
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
1. 2-line control panels: On the printer control panel, press the button.
Touchscreen control panels: From the Home screen on the printer control panel, swipe until the Setup
menu displays. Touch the Setup
icon to open the menu.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Shut Down After
3. Select the time for the Shut Down After delay.
122 Chapter 8 Manage the printer ENWW