HP laserjet pro M227sdn - Solve Wired Network Problems

Adjust Print Density
Complete the following steps to adjust the print density.
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
1. 2-line control panels: On the printer control panel, press the Setup button.
Touchscreen control panels: From the Home screen on the printer control panel, swipe until the Setup
menu displays. Touch the Setup
icon to open the menu.
2. Open the following menus:
●
System Setup
●
Print Density
3. Select the correct print density setting.
●
1: lightest
●
2: lighter
●
3: default
●
4: darker
●
5: darkest
168 Chapter 9 Solve problems ENWW