HP laserjet pro M227sdn - Set the Delay Shut Down setting

NOTE: The default value is 4 hours.
Set the Delay Shut Down setting
Use the control panel menus to select whether or not the printer delays shutting down after the power
button is pressed.
Complete the following procedure to change the Delay Shut Down setting:
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
1. 2-line control panels: On the printer control panel, press the button.
Touchscreen control panels: From the Home screen on the printer control panel, swipe until the Setup
menu displays. Touch the Setup
icon to open the menu.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Delay Shut Down
3. Select one of the delay options:
●
No Delay: The printer shuts down after a period of inactivity determined by the Shut Down After
setting.
●
When Ports Are Active: When this option is selected the printer will not shut down unless all ports
are inactive. An active network link or fax connection will prevent the printer from shutting down.
ENWW Energy-conservation settings 123