HP laserjet pro M227sdn - Enable or disable Wi-Fi Direct

NOTE: If the printer name does not display, you might be out of range of the Wi-Fi Direct signal. Move
the device closer to the printer.
6. If prompted, enter the Wi-Fi Direct password.
NOTE: For Android devices that support Wi-Fi Direct, if the connection method is set to Automatic, the
connection will occur automatically, without a password prompt. If the connection method is set to
Manual, you will need to either press the OK button, or provide a personal identification number (PIN)
— displayed on the printer control panel — as a password on the mobile device.
NOTE: To access the Wi-Fi Direct password, from Home screen on the printer control panel, touch the
Connection Information
button.
7. Open the document, and then select the Print option.
NOTE: If the mobile device does not support printing, install the HP ePrint mobile app.
8. Select the printer from the list of available printers, and then select Print.
9. After the print job is complete, some mobile devices need to be reconnected to the local network.
●
Android 4.0 and later tablets and phones with the HP Print Service or Mopria mobile printing plugin
installed
●
Most Windows 8.1 computers, tablets, and laptops that have the HP print driver installed
The following devices and computer operating systems do not support Wi-Fi Direct, but can print to a printer
that does:
●
Apple iPhone and iPad
●
Mac computers running OS X
For more information on Wi-Fi Direct printing, go to
www.hp.com/go/wirelessprinting.
NFC and Wi-Fi Direct capabilities can be enabled or disabled from the printer control panel.
Enable or disable Wi-Fi Direct
Wi-Fi Direct capabilities must be enabled first from the printer control panel.
1.
From the Home screen on the printer control panel, select the Connection Information
button.
2. Open the following menus:
●
Wi-Fi Direct
●
Settings
●
On/Off
3. Touch the On menu item. Touching the Off button disables Wi-Fi Direct printing.
ENWW Mobile printing 55