HP laserjet pro M227sdn - Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature; Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature

To Next Page

To Previous Page

Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature

1. Open the HP EWS.

a. 2-line control panels: View the control-panel display to see the IP address.

Touchscreen control panels: From the Home screen on the printer control panel, touch the

Network

button to display the IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it

displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS

opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the

computer.

2. Click the System tab.

3. From the left navigation pane, select Supply Settings.

4. From the Cartridge Protection drop-down list, select Protect Cartridges.

5. Click the Apply button.

CAUTION: After enabling cartridge protection for the printer, all subsequent toner cartridges installed

in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable

the Cartridge Protection feature before installing the new cartridge.

Turning the feature off does not turn off protection for cartridges that are currently installed.

Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature