1 2
1 2-line control panel
2 Touchscreen control panel
2-line control panels
1. On the printer control panel, press the Setup
button. Open the Network Setup menu, and then
select Show IP Address to display the IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it
displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS
opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the
computer.
3. Click the HP Web Services tab, and then click Enable. The printer enables Web Services, and then
prints an information page.
The information page contains the printer code necessary to register the HP printer at HP
Connected.
4. Go to
www.hpconnected.com to create an HP ePrint account and complete the setup process.
Touchscreen control panels:
1.
From the Home screen on the printer control panel, touch the Connection Information
button.
2. Open the following menus:
●
HP ePrint
●
Settings
●
Enable Web Services
3. Touch the Print button to read the terms of use agreement. Touch the OK button to accept the
terms of use and enable HP Web Services
ENWW Mobile printing 57
To Next Page
Loading...