HP omnibook OmniBook XE2 User Manual

2-2 Removal and Replacement HP OmniBook XE2
Table 2-2. Required Equipment
•
Small Phillips screwdriver, preferably magnetized.
• 5 mm hex driver.
• Pointed knife or probe.
• Small flat-blade screwdriver.
• uPGA-1 CPU removal tool ( Technology Code DD )
Table 2-3. Recommended Screw Torques
Screw Thread Size Torque (kgf•cm) Torque (lbf•in)
M2 1.3 – 1.8 1.1 – 1.5
M2.5 (4–5 mm long) 3.0 – 3.5 2.6 – 3.0
M2.5 (16–19 mm long) 2.5 – 3.0 2.2 – 2.6
M3 3.0 – 3.5 2.6 – 3.0

HP omnibook OmniBook XE2 Specifications

General

Brand	HP
Model	omnibook OmniBook XE2
Category	Laptop
Language	English