HP Omnibook XE3 Reference Guide

Specifications and Regulatory Information
Hardware and Software Specifications
Reference Guide 121
Television Type NTSC or PAL standard. NTSC
Base Memory Shows the system memory size. 640KB
Extended Memory Shows the extended memory size. Detected
automatically.
CPU Serial Number When enabled, reports Intel CPU
serial number to application software.
Enabled
System Devices Menu Default
PS/2 Pointing Device When an external PS/2 mouse is
connected, enables internal pointing
device also (Both) or disables it
(External Only).
Both
External Fn key Enables or disables Left Ctrl+Left Alt
on external keyboard to simulate
notebook keyboard Fn key.
Enabled
IDE Controller Configures local bus IDE controller to
enable primary channel (Primary),
primary and secondary channel
(Both), or neither (Disabled).
Both
FDD Controller Enables or disables floppy disk drive
controller.
Enabled
Serial Port Sets how the serial port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
Enabled
Base I/O address Sets the I/O address and interrupt. 3F8 IRQ4
Infrared Port Sets how the infrared port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
Disabled
Mode When IR port is enabled, sets the
hardware to support SIR (Standard IR)
or FIR (Fast IR) infrared
communications.
SIR

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English