EasyManua.ls Logo

HP Omnibook XE3 - Hardware Specifications

HP Omnibook XE3
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications and Regulatory Information
Hardware and Software Specifications
124 Reference Guide
Load Previous Values Discards Setup changes since last
save, stays in Setup. Does not affect
security, date, or time changes.
Save Changes Saves Setup changes to CMOS and
stays in Setup. Security settings are
saved when changed.
Hardware specifications
Dimensions 13.03"x10.72"x1.59 (331x272.3x40.5mm) for 12.1"14.1"
13.03"x10.72"x1.65" (331x272.3x42.0mm) for 15"
Weight 6.5lbs (3.0kg) with 12.1 TFT LCD/LiIon battery/FDD/CD-ROM/64MB/HDD
CPU Intel PIII/Celeron uPGA2 with SpeedStep (PIII only)
100MHz FSB
Chip Set Intel 440ZXM-100
Main Memory 100MHz SDRAM (PC100)
Maximum memory upgrade to 256MB by two 128MB SODIMM (144-pin/3.3V)
modules in two 1.25 slots
Hard Disk Drive 9.5mm, 2.5" HDD
PCI Bus Master Enhanced IDE
Supports Ultra DMA/33
Floppy Disk
Drive
12.7mm, 1.44MB (3-mode)
CD-ROM/DVD 12.7mm, 24X CD-ROM or 8X DVD
Display 800x600 SVGA TFT 12.1 LCD
1024x768 XGA TFT 13 LCD
1024x768 XGA TFT 14.1 LCD
1024 x768 XGA TFT 15 LCD
Video chip S3 Savage/IX
Integrated 4MB SGRAM
Supports AGP 2X mode
128-bit, single-cycle 3D architecture
Simultaneous LCD/CRT, LCD/CRT/TV capability
Optimized hardware motion compensation
New high-performance 128-bit 2D engine
Integrated single-channel 110MHz LVDS interface
Integrated NTSC/PAL TV encoder

Table of Contents

Other manuals for HP Omnibook XE3

Related product manuals