HP Omnibook XE3 Reference Guide

Specifications and Regulatory Information
Hardware and Software Specifications
Reference Guide 123
Set Supervisor
Password
Sets, changes, or clears supervisor
password. This password protects
BIOS Setup settings.
Password Required
to Boot
Sets whether a user password is
required when the computer boots.
Enabled
Floppy Boot Controls permission to boot system
from floppy disk drive.
Enabled
Power Menu Default
Intel SpeedStep
Technology
Sets CPU high-speed/low-speed
mode for AC and battery operation:
boot at high speed with AC, otherwise
low (Auto); no runtime support, boot at
low speed (Disabled); boot at low
speed (Battery Optimized); boot at
high speed (Max. Performance); or
boot at low speed with AC, otherwise
high (Reverse).
Auto
Auto Turn-On on
Dock
Enables or disables automatic system
turn-on when computer is docked.
Enabled
Boot Menu Default
Indicates boot order of drives (change
order with F5 and F6 keys).
Floppy Drive
Hard Drive
CD-ROM/DVD Drive
Exit Menu
Saving Changes and
Exit
Saves Setup changes to CMOS,
exits, and reboots.
Discarding Changes
and Exit
Discards Setup changes since last
save, exits, and reboots. Does not
affect security, date, or time changes.
Get Default Values Restores default settings, stays in
Setup. Does not affect security, date,
or time changes.

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English