6. Remove the back cover (4).
Reverse this procedure to install the back cover.
Battery
Description Spare part number
Battery, 2-cell, 33-Wh (includes cable and double-sided adhesive) 810985-005
Before removing the battery, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 26).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the battery:
1. Disconnect the four screws(1) from the system board.
2. Disconnect the battery cable (2) from the system board.
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts