8–16 Startup and Reference Guide—Part 2
Hardware Options and Upgrades
To insert a memory module:
a. Align the keyed (notched) edge of the module with the
keyed area in the memory slot 1.
b. With the module at a 45-degree angle from the surface
of the memory compartment, press the module into the
memory slot until it is seated 2.
c. Push the module down until the retention clips snap
into place 3.
Inserting a memory module
Ryan Masterfile.book Page 16 Monday, June 9, 2003 2:33 PM
To Next Page
Loading...
Need help?
General