Drives
Startup and Reference Guide—Part 2 5–9
Inserting an Optical Disc
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray, then pull the tray outward until it is fully
extended 2.
3. Position a CD or one-sided DVD over the tray, label side up.
4. Gently press the center of the disc onto the tray spindle 3
until the disc snaps into place. Handle the disc by the edges,
not the flat surfaces. (If the media tray is not fully extended,
tilt the disc to position it over the tray spindle, then press it
down into position.)
5. Close the media tray 4.
Inserting an optical disc into the optical drive
Ryan Masterfile.book Page 9 Monday, June 9, 2003 2:33 PM
To Next Page
Loading...
