Drives
Startup and Reference Guide—Part 2 5–5
Replacing the Internal Hard Drive
The hard drive in the hard drive bay is the internal hard drive.
Remove the internal hard drive only for repair or replacement.
Ä
CAUTION: To prevent an unresponsive system and loss of work, do not
begin this procedure until you have:
■ Saved your work, closed all open applications, and shut down the
notebook.
■ Disconnected the notebook from external power and removed the
battery pack.
1. Save your work and close all open applications.
2. Shut down the notebook and close the display.
3. Disconnect the notebook from external power.
4. Remove the battery pack.
5. Turn the notebook upside down.
6. Remove the 4 hard drive retaining screws from the hard
drive bay.
Removing the hard drive retaining screws
Ryan Masterfile.book Page 5 Monday, June 9, 2003 2:33 PM
To Next Page
Loading...
Need help?
General