HP PROCURVE 2910AL Configuration Guide

6
IPv6 Management Security Features
Contents
IPv6 Management Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Authorized IP Managers for IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Usage Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Configuring Authorized IP Managers for Switch Access . . . . . . . . . . . 6-5
Using a Mask to Configure Authorized Management Stations . . . . . . 6-5
Configuring Single Station Access . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Configuring Multiple Station Access . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Displaying an Authorized IP Managers Configuration . . . . . . . . . . . . 6-12
Additional Examples of Authorized IPv6 Managers Configuration . 6-13
Secure Shell for IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Configuring SSH for IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Displaying an SSH Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17
Secure Copy and Secure FTP for IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
6-1

HP PROCURVE 2910AL Specifications

General

Model	HP ProCurve 2910al
Switching Capacity	128 Gbps
Throughput	95.2 Mpps
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
Manageable	Yes
Power	100-240 VAC
Power Supply	Internal
Operating Temperature	0°C to 45°C (32°F to 113°F)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF
Features	IPv6, VLAN, QoS, ACLs
Operating Humidity	15% to 95% non-condensing
Uplink Ports	4
Power over Ethernet	Yes (PoE+ models available)