HP PROCURVE 2910AL Configuration Guide

IPv6 Management Security Features
IPv6 Management Security
IPv6 Management Security
This chapter describes management security features that are IPv6 counter-
parts of IPv4 management security features on the switches covered by this
guide.
Feature Default CLI
configure authorized IP
managers for IPv6
disabled 6-5
configuring secure shell for IPv6 disabled 6-15
enabling secure copy and secure disabled 6-18
FTP for IPv6
This chapter describes the following IPv6-enabled management security
features included in software release K.13.01:
■ Authorized IP Managers for IPv6
■ Secure Shell for IPv6
■ Secure Copy and Secure FTP for IPv6
6-2

HP PROCURVE 2910AL Specifications

General

Model	HP ProCurve 2910al
Switching Capacity	128 Gbps
Throughput	95.2 Mpps
Management	Web, CLI, SNMP
Jumbo Frame Support	Yes
Manageable	Yes
Power	100-240 VAC
Power Supply	Internal
Operating Temperature	0°C to 45°C (32°F to 113°F)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF
Features	IPv6, VLAN, QoS, ACLs
Operating Humidity	15% to 95% non-condensing
Uplink Ports	4
Power over Ethernet	Yes (PoE+ models available)