To Next Page

To Previous Page

Introduction to IPv6

Configuration and Management

IPv6 Management Features

The switch's IPv6 management features support operation in an environment

employing IPv6 servers and management stations.With a link to a properly

configured IPv6 router, switch management extends to routed traffic solu-

tions. (Refer to the documentation provided for the IPv6 router.) Otherwise,

IPv6 management for the switches covered by this guide are dependent on

switched management traffic solutions.

TFTPv6 Transfers

The switch supports these downloads from an IPv6 TFTP server:

■ automatic OS download

■ manual OS download

■ command script download and execution

■ configuration file downloads

■ public key file downloads

■ startup configuration file downloads

The switch supports these uploads to an IPv6 TFTP server

■ startup or running configuration upload

■ OS upload from flash in current use (primary or secondary)

■ event log content upload

■ crash log content upload

■ output of a specified command

Refer to “TFTP File Transfers Over IPv6” on page 5-15.

IPv6 Time Configuration

The switch supports both Timepv6 and SNTPv6 time services. Refer to “SNTP

and Timep” on page 5-9.

Telnet6

The switch supports both of the following Telnet6 operations:

■ Enable (the default setting) or disable Telnet6 access to the switch from

remote IPv6 nodes.

■ Initiate an outbound telnet session to another IPv6 networked device.

Refer to “Telnet6 Operation” on page 5-6

2-10

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General