To Next Page

To Previous Page

IPv6 Management Security Features

Authorized IP Managers for IPv6

■ You configure each authorized manager address with Manager or Opera-

tor-level privilege to access the switch in a Telnet, SNMPv1, or SNMPv2c

session. (Access privilege for SSH, SNMPv3, and web browser sessions

are configured through the access application, not through the Authorized

IP Managers feature.)

• Manager privilege allows full access to all web browser and console

interface screens for viewing, configuration, and all other operations

available in these interfaces.

• Operator privilege allows read-only access from the web browser and

console interfaces.

■ When you configure station access to the switch using the Authorized IP

Managers feature, the settings take precedence over the access config-

ured with local passwords, TACACS+ servers, RADIUS-assigned settings,

port-based (802.1X) authentication, and port security settings.

As a result, the IPv6 address of a networked management device must be

configured with the Authorized IP Managers feature before the switch can

authenticate the device using the configured settings from other access

security features. If the Authorized IP Managers feature disallows access

to the device, then access is denied. Therefore, with authorized IP man-

agers configured, logging in with the correct passwords is not sufficient

to access a switch through the network unless the station requesting

access is also authorized in the switch’s Authorized IP Managers config-

uration.

6-4

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General