HP ProCurve 5406zl Access Security Guide

Configuring Port-Based and Client-Based Access Control (802.1X)
Operating Notes
Operating Notes
■ Applying Web Authentication or MAC Authentication Concur-
rently with Port-Based 802.1X Authentication: While 802.1X port-
based access control can operate concurrently with Web Authentication
or MAC Authentication, port-based access control is subordinate to Web-
Auth and MAC-Auth operation. If 802.1X operates in port-based mode and
MAC or Web authentication is enabled on the same port, any 802.1X
authentication has no effect on the ability of a client to access the
controlled port. That is, the client’s access will be denied until the client
authenticates through Web-Auth or MAC-Auth on the port. Note also that
a client authenticating with port-based 802.1X does not open the port in
the same way that it would if Web-Auth or MAC-Auth were not enabled.
That is, any non-authenticating client attempting to access the port after
another client authenticates with port-based 802.1X would still have to
authenticate through Web-Auth or MAC-Auth.
10-57

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM