HP ProCurve 5406zl Access Security Guide

Key Management System
Configuring Key Chain Management
Adds a new Time-Independent
key to the “Procurve1” chain.
Displays keys in the key chain
entry.
Figure 13-2. Example of Adding and Displaying a Time-Independent Key to a Key Chain Entry
Assigning Time-Dependent Keys to a Chain
A time-dependent key has Accept or Send time constraints. It is valid only
during the times that are defined for the key . If a time-dependent key is used,
there is usually more than one key in the key chain entry.
Syntax: [no] key-chain < chain_name > key < key_id >
Generates or deletes a key in the key chain entry
< chain_name >. Using the optional no form of the
command deletes the key. The < key_id > is any
number from 0-255.
[ key-string < key_str > ]
This option specifies the key value referenced by the
protocol using the key. The < key_str > can be any
string up to 14 characters in length.
accept-lifetime < mm/dd/yy [ yy ] hh:mm:ss | now >
Specifies the start date and time of the valid period
in which the switch can use this key to authenticate
inbound packets.
13-5

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM