HP ProCurve 5406zl Access Security Guide

Configuring Secure Shell (SSH)
Messages Related to SSH Operation
Messages Related to SSH Operation
Message Meaning
00000K Peer unreachable. File transfer did not occur. Indicates an error in
communicating with the tftp server or not finding the file to
download. Causes include such factors as:
• Incorrect IP configuration on the switch
• Incorrect IP address in the command
• Case (upper/lower) error in the filename used in the
command
• Incorrect configuration on the TFTP server
• The file is not in the expected location.
• Network misconfiguration
• No cable connection to the network
00000K Transport error. File transfer did not occur. lIndicates the switch
experienced a problem when trying to copy tftp the
requested file. The file may not be in the expected directory,
the filename may be misspelled in the command, or the file
permissions may be wrong.
Cannot bind reserved TCP port
The ip ssh port command has attempted to configure a
<port-number>.
reserved TCP port. Use the default or select another port
number. See “Note on Port Number” on page 7-17.
Client public key file corrupt or not
The client key does not exist in the switch. Use copy
found. Use 'copy tftp pub-key-file <ip-
tftp to download the key from a TFTP server.
addr> <filename>' to download new file.
Download failed: overlength key in key The public key file you are trying to download has one of the
file. following problems:
• A key in the file is too long. The maximum key length is
Download failed: too many keys in key
1024 characters, including spaces. This could also mean
file.
that two or more keys are merged together instead of
being separated by a <CR><LF>.
Download failed: one or more keys is not
• There are more than ten public keys in the key file and
a valid public key.
switch total. Delete some keys from the switch or file. The
switch does not detect duplicate keys.
• One or more keys in the file is corrupted or is not a valid
rsa public key.
Refer to “To Create a Client-Public-Key Text File” on page
23 for information on client-public-key properties.
Error: Requested keyfile does not exist.
The client key does not exist in the switch. Use copy
tftp to download the key from a TFTP server.
7-27

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM