HP ProCurve 5406zl Access Security Guide

RADIUS Authentication and Accounting
Viewing RADIUS Statistics
RADIUS Authentication Statistics
Syntax: show authentication
Displays the primary and secondary authentication meth-
ods configured for the Console, Telnet, Port-Access (802.1X),
and SSH methods of accessing the switch. Also displays the
number of access attempts currently allowed in a session.
show radius authentication
Displays NAS identifier and data on the configured RADIUS
server and the switch’s interactions with this server.
(Requires prior use of the radius-server host command to
configure a RADIUS server IP address in the switch. See
“Configuring RADIUS Accounting” on page 6-21.)
Note: The Webui
access task shown in
this figure is available
only on the 5400zl
switches.
Figure 6-12. Example of Login Attempt and Primary/Secondary Authentication
Information from the Show Authentication Command
6-31

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM