6-26
Configuring the Switch
Port Settings
Configuring the Switch
Configuring Port Parameters from the Web Browser
Interface
Clicking on
[Modify Selected Ports]
opens up the following screen.
Figure 6-10. Example of Port Configuration and Modify Selected Ports Windows
on the Web Browser Interface
1. Click Here
3. Click on a port to select it for
configuration. To select multiple
ports, use standard Windows methods
using Ctrl and Shift keys.
4. Click on “Modify Selected Ports”.
2. Click Here
6. Click on “Apply Settings” to
activate changes.
5. Select configuration changes.
Sraswb.book : SIER_SW6.FM Page 26 Tuesday, June 30, 1998 12:20 PM
To Next Page
Loading...
