7-14
Monitoring and Analyzing Switch Operation
Spanning Tree (STP) Information
Monitoring and Analyzing
Switch Operation
Spanning Tree (STP) Information
To access the Spanning Tree Information screen from the Main Menu, click on:
1. Status and Counters
7. Spanning Tree Information
STP must be enabled on the switch to display the following data:
Figure 7-12. Example of Spanning Tree Information
Use this screen to determine current switch-level STP parameter settings and
statistics.
Sraswb.book : SIER_SW7.FM Page 14 Tuesday, June 30, 1998 12:20 PM
To Next Page
Loading...
