Diagnostic tools and setup utilities 106
• View system serial number.
• View NIC MAC addresses.
• Set asset tag.
• Configure POST F1 prompt.
Advanced menu
Figure 101 Advanced Menu of the BIOS Setup Utility
WARNING: Incorrect settings may cause the server to malfunction. To correct the settings, press the
F9 key to restore the default settings.
• CPU Configuration—Configure CPU settings.
• SATA Configuration—Configure the SATA device(s).
• Memory Configuration—Configure the memory settings.
• AHCI Configuration—Configure the AHCI settings.
• IPMI Configuration—Configure IPMI 2.0 settings.
• PCI Express Configuration—Configure PCI Express settings.
• Remote Access Configuration—Configure the remote access settings.
• Trusted Platform Module—Configure trusted platform module.
• USB Configuration—Configure USB settings.
• OnBoard Peripherals Configuration—Configure the settings of onboard peripherals.
• Virtual Floppy—Disable/Enable virtual floppy. Allow users to load SW RAID driver without
pressing F6 key during MS W2K3 OS installation when Virtual Floppy option is enabled.
• Power Efficiency Mode—Select the power efficiency mode.
To Next Page
Loading...
