Removal and replacement procedures 64
To install the air baffle:
1. Connect all necessary cables.
2. Gently place the air baffle on the system board.
Figure 44
Installing the Air Baffle
Memory
Each system board has twenty-four DIMM slots that support up to 192 GB maximum system memory
(8 GB in each of the twenty-four DIMM slots).
You must adhere to the following guidelines when adding or replacing memory modules:
• For 2P system, both physical processors must be of the same type and speed.
• Use DDR3 RDIMM/UDIMM.
• Support single-rank, dual-rank, and quad-rank DIMM.
To Next Page
Loading...
