Connectors, switches, and LEDs 97
Item Designator Description
21 J100 SAS LED connector
22 J36, J69 Fan connectors 6/7
23 J13 Mini-SAS connector for SATA
24 J55 Power backplane control connector
25 J98 Front panel header
26 J56 TPM connector
27 J78 PCIe x4 slot
28 SATA ODD 2 SATA connector
29 SATA ODD 1 SATA connector
30 BH1 3 V CMOS battery (CR2032)
31 J6 NMI Jumper
Jumper
The system board contains a system maintenance jumper (J1). Table 12 describes the jumper settings.
Table 12
System Maintenance Jumper Setting (J1)
Jumper Status (default=off)
A Clear BMC password
B Recovery BMC
C Recovery BIOS
D Clear CMOS
LED indicators
This section contains illustration and descriptions of internal and external status LED indicators located
on the:
• Front panel
• Optical drive
• Hard drive
• Rear panel
• System board
These LED indicators aid in problem diagnosis by indicating the status of system components and
operations of the server.
To Next Page
Loading...
