Removal and replacement procedures 39
Optical Media Device Bay
The optical media device bay of servers with 4 LFF HDDs and 8 SFF HDDs support the optional
installation of a 9.5 mm (0.37 in.) DVD ROM optical drive, so the following procedure is for server
with 4 LFF HDDs.
To remove the optical drive carrier:
1. Remove the top cover and then unplug the SATA and power cables.
2. Loosen the screws.
Figure 7
Removing the Cables and Screws
3. Push the optical drive toward the front of the unit.
4. Pull the optical drive out of the chassis.
Figure 8
Removing the Optical Drive
To Next Page
Loading...
