Removal and replacement procedures 78
To remove the BBWC assembly:
1. Push the tab that secures the BBWC assembly to the system board tray.
2. Slide the BBWC assembly, and then lift it out of the system board assembly.
Figure 64
Removing the BBWC Assembly
To reinstall the BBWC assembly:
1. Align the locking tabs on the BBWC assembly to their holes on the tray.
2. Press the BBWC assembly into the tray, and then push it along the direction of the arrow to lock
the locking tabs.
Figure 65
Reinstalling the BBWC Assembly
To Next Page
Loading...
