HP ProLiant DL385 - Removal and replacement procedures; Required tools; Safety considerations; Preventing electrostatic discharge

13
Removal and replacement procedures
In This Section
Required tools...............................................................................................................................13
Safety considerations....................................................................................................................13
Preparation Procedures.................................................................................................................15
Non-hot-plug procedures..............................................................................................................21
Hot-plug procedures .....................................................................................................................51
Server cabling...............................................................................................................................61
•
•
Required tools
You need the following items for some procedures:
T-15 Torx screwdriver (provided inside the server)
HP Insight Diagnostics software ("HP Insight Diagnostics" on page 80
)
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity
from a finger or other conductor may damage system boards or other static-
sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
• Avoid hand contact by transporting and storing products in static-safe
containers.