42 HP ProLiant DL385 Server Maintenance and Service Guide
3. Remove the access panel ("Removing the access panel" on page 19).
NOTE: The server ships with at least two DIMMs installed in DIMM
slots 3B and 4B.
4. Remove the DIMM.
CAUTION: Be sure to install DIMMs in the proper
configuration. Refer to the Documentation CD.
CAUTION: Use only Compaq branded or HP DIMMs. DIMMs
from other sources may adversely affect data integrity.
IMPORTANT: DIMMs do not seat fully if turned the wrong way.
To replace a DIMM, align the DIMM with the slot and insert the DIMM firmly.
When fully seated, the DIMM slot latches lock into place.
Processor
To remove the component:
1. Power down the server ("Powering down the server" on page 17).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the server from the rack" on page 18).
To Next Page
Loading...
